ZKX's LAB

ubuntu系统怎么配置成静态路由 ubuntu 跟踪数据路由

2021-04-26知识1

ubuntu linux 使用路由器,怎么上网。 1.如果是通过路由器上网,你应该网络设置为IP自动获取就行了。2.具体方法如下:a.以管理员身份登陆,把网络设置为IP自动获取,让网卡通过DHCP自动获取IP地址。gedit/etc/network/interfaces修改文件/etc/network/interfaces如下文This file describes the network interfaces available on your systemand how to activate them.For information,see interfaces(5).The loopback network interface(配置环回口)auto lo#开机自动激lo接口iface lo inet loopback#配置lo接口为环回口The primary network interface(配置主网络接口)auto eth0#开机自动激活eth0接口iface eth0 inet dhcp#配置eth0接口为DHCP自动获取(关键是这句)b.用下面的命令把网络重启下网络etc/init.d/networking restart3.用ifconfig 及 ping 命令 测试下可行性。ifconfig/查看网络获取情况。ping gateway/ping下网关。

ubuntu linux 网页能访问路由,却访问不了公网,需要帮助啊! host www.baidu.com connection time out;no servers could be reached 超时啊!这么说网关没问题,DNS有问题啊 这都是自动获得啊,这么会有问题呢 自动获得的DNS和我XP下。

ubuntu 如何为某一IP增加静态路由 sudo 。当然要驱动了,驱动从逻辑上连接了网卡和电脑 静态配置ip:在命令行下输入ifconfig ethx ip地址 子网掩码 例如 ifconfig eth0 192.168.1.1 255.255.255.0 。

#ubuntu 跟踪数据路由

随机阅读

qrcode
访问手机版